Seamless Cover over a Wide Measuring Range from 0.05 to 3000µ (3mm)
Powerful Particle Circulation Mechanism
Handles Many Sample Types and Measurement Aims
Description | Model | Method |
---|---|---|
Standard Sampler & flow cell | SALD-MS30 | Wet Measurement |
Non-circulating sampler | SALD-AC30 | Wet Measurement |
Injection type Dry Measurement Unit | SALD-DS21 | Dry Measurement |
Free-fall type Dry Measurement Unit | SALD-DS3 | Dry Measurement |
Specifications SALD-3101
Measurement method | Laser diffraction method |
---|---|
Measuring range | 0.05-3000μm |
Measuring unit:SALD-31 01 (P/N 347-60000-20)
|
Sampler unit:SALD-MS30 (P/N 346-63701-20)
|
||
---|---|---|---|
Light source
|
Semiconductor laser (690nm wave length) | Dispersing bath | Made of polyacetal and SUS316, with about 400cm3 inner volume |
Photo sensor
|
81 elements(76 elements for forward area and 1 element for side area and 4 elements for back area) | Stirrer | Blade type, with adjustable rotation speed |
Power requirement
|
AC 100 to 120V 1A/AC 200 to 240V 0.5A 50/60Hz | Sonicator | 42kHz frequency, 40W output power |
Dimensions and weight
|
95cm wide, 32cm deep, 41cm high, and 58kg weight | Liquid pump | Adjustable radial pump, with delivery speed up to 5000 cm3/min |
Batch cell:SALD-BC30 (P/N 321-48338-02)
|
Material of wetted parts | Stainless steeI(SUS304, SUS316) | |
Material
|
Made of quarts glass | Power requirement | AC 100 to 120V 1.5A/AC 200 to 240V G.8A 50/60Hz |
Inner volume
|
12cm3 | Dimensions and weight | 43cm wide, 41cm deep, 40cm high, and 29kg weight |
Stirrer
|
Vertical movement blade type, with adjustable speed | Flow cell | Made of quarts glass |
PC System Requirements
Processor | 133MHz or higher Pentium-compatible CPU | Available disk space | 30megabytes(MB) |
---|---|---|---|
RAM | 32 megabytes(MB) of RAM recommended | CD-ROM drive | Yes |
Operating System | Microsoft Windows 95/98/NT4.0/2000/XP | Serial port | 1port |
Monitor | Super VGA or higher resolution monitor |
Option
These units measure the particle size distribution of a sample powder dispersed in the air.
Use these units for particle size distribution measurements of powders with no suitable dispersion medium and powders that dissolve in liquids.
Two unit types are available, to suit the sample state and measurement aim.
SALD-DS21 Injection type Dry Measurement Unit (measuring range: approx. 0.8 to 1000um) (P/N 347-60100-20)
Sample powder is dispersed for measurement by injecting in the air from a nozzle.
The unit offers three types of sample suction mechanism and three types of nozzle, which allow setting of the optimal dispersion force and sample volume conditions to match the sample state and aim of measurement.
SALD-DS3 Free-fall type Dry Measurement Unit (measuring range: approx. 10 to 3000um) (P/N 346-61206-10)
The sample is measured during free fall.
Even easily damaged particles can be directly measured,
A separate dry-measurement detector case (P/N 347-60010-20)
compressor (SALD-DS21 only) and dust collector are required to use the dry measurement units.
SALD-AC30 Acyclic Motion Sampler (P/N 346-83746-02)
Completes one measurement cycle in 30 seconds, Including washing. Automatically detects sample infuse to start measurement and data storage. The rapid measurement time saves effort and makes this the optimal unit for measuring samples with a rapidly changing particle size distribution, such as powder undergoing a grinding process.
Example of Particle Size Distribution of Corn Starch (dry measurement)
2. Example of Particle Size Distribution of Flour (dry measurement)
Measurement of the particle size distribution of these sands was attempted on the SALD-3000. As expected, it was found that "Sun sand" is slightly larger than "Star sand."
Comments are closed.