Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
Features
- Supports multimode terminals
(LTE FDD (2×2 MIMO), W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS, CDMA2000® 1X/1xEV-DO Rev. A) - Simple operation software supports test conditions and service/call-processing function tests
- Built-in CFCS server function supports GUI-based IMS service tests, such as VoLTE
- LTE data throughput up to 100 Mbps (downlink) and 50 Mbps (uplink)
- All-in-One DC-HSDPA 43.2 Mbps Support
- Supports 2-cell test environment, including InterRAT Cell Reselection, Redirection, Cell Change, CS-Fallback, etc.
- Built-in PC with control and application server functions reduces benchtop footprint
Description
The MD8475A Signalling Tester is an all-in-one base station simulator supporting LTE FDD, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS, and CDMA2000® 1X/1xEV-DO Rev. A. It supports service and call-processing tests for multimode LTE smartphones and mobiles with excellent cost-performance.
A full line of test environments are supported for the general mobile verification phase, such as max. throughput performance tests, stress tests, and battery consumption tests of multisystem LTE mobiles using 2×2 MIMO, as well as CS-Fallback, call connection reliability and stability tests at handover, communication tests at low RF power, and service verification using LTE Multiple PDN and SMS in a 2-cell environment*.
In addition, test conditions are easily set using the SmartStudio GUI, helping cut test environment configuration time.
*: Supports combination of LTE/LTE, LTE/W-CDMA, LTE/GSM and LTE/CDMA2000; requires two MD8475A units for testing LTE/CDMA2000.
Specifications
SmartStudio Test Functions
| Function | Description | LTE FDD | W-CDMA | GSM | CDMA 2000 |
|
| General | Location registration | ○ | ○ | ○ | ○ | |
| Out of service Setting | Sets BTS Power output to OFF and sets UE to outside NW condition | ○ | ○ | ○ | ○ | |
| Power Control for GUI | Power control for BS is changed into IDLE and Communication | ○ | ○ | ○ | ○ | |
| L1/L2 Countor | Measured values indicating the performance of Layer 1 and Layer 2 | ○ | ○ | − | − | |
| RF Monitor | The channel power, such as frequency, a frequency error and PDSCH, and PUSCH, is displayed | ○ | ○ | ○ | − | |
| Throughput Monitor | Actual data throughput can be verified at a fixed rate or at a rate determined by UE | ○ | ○ | ○ | − | |
| Trace view | The sequence of each layer is displayed on real time | ○ | ○ | ○ | − | |
| Voice/ Video Call |
W-CDMA GSM CDMA2000 |
UE originated/terminated voice call (Loop-back/Echo-back) |
Performs loop-back communication test*1 | ○ | ○ | ○ |
| UE originated/terminated voice call (Handset) |
Performs handset communication test | ○ | ○ | − | ||
| Emergency Call | Performs Emergency Call test with or without Test SIM*2 | ○ | ○ | ○ | ||
| Voice call released | ○ | ○ | ○ | |||
| Caller ID Setting | Performs Show ID/Hide ID/Unknown ID/Payphone/International call settings | ○ | ○ | ○ | ||
| Access Class Barred (Release99) [Barred] |
Bars all calls according to Release 99 standard | ○ | ○ | |||
| Access Class Barred (Release99) [Emergency] |
Bars all calls except emergency calls according to Release 99 standard | ○ | ○ | |||
| Access Class Barred (PSIST/ACCT) |
Bars all calls according to CDMA2000 | ○ | ||||
| W-CDMA | UE originated/terminated video call (Loop-back) |
Performs loop-back communication test*1 | ○ | |||
| Video call released | ○ | |||||
| Packet Connection |
IPv4 Packet test | Data supporting IPv4 can be sent and received | ○ | ○ | ○ | ○ |
| IPv6 Packet test | Data supporting IPv6 can be sent and received | ○ | ○ | ○ | − | |
| Packet Preservation/Dormant testing | Releases RRC Connection while maintaining PDN Bearer | ○ | ○ | − | ○ | |
| LTE FDD | UE originated/terminated SISO/MIMO packet call*3 |
Performs application tests utilizing packet data communications by connecting to server | ○ | |||
| SISO/MIMO packet call released |
○ | |||||
| Multiple PDN Bearer | Performs Multi Session packet communications test (Maimu 8 pass) | ○ | ||||
| W-CDMA | UE originated/terminated W-CDMA/HSPA packet call*4 |
Performs application tests utilizing packet data communications by connecting to server | ○ | |||
| UE originated/terminated HSPA Evolution/DC-HSDPA packet call*5 |
Performs application tests utilizing packet data communications by connecting to server | ○ | ||||
| W-CDMA/HSPA/HSPA Evolution/DC-HSDPA packet call released |
○ | |||||
| RRC Status Change | The mobile RRC Status can be changed during packet data communications (Cell DCH ⇔ Cell FACH ⇔ Cell PCH) |
○ | ||||
| UE originated PPP packet call | Performs PPP (Built-in server) packet data communication test (Not support Serial connection) | ○ | ||||
| PPP packet call released | Performs PPP (Built-in server) packet data communication test | ○ | ||||
| GSM | UE originated/terminated GPRS/EGPRS packet call*6 |
Performs application tests utilizing packet data communications by connecting to server | ○ | |||
| GPRS/EGPRS packet call released |
○ | |||||
| CDMA2000 | UE originated CDMA2000/ EVDO packet call*7 |
Performs application tests utilizing packet data communications by connecting to server | ○ | |||
| CDMA2000/EVDO packet call released |
○ | |||||
| Messaging | SMS transmission/reception | Performs SMS (7bit-ASCII, Unicode, Binary) test*1 | ○ | ○ | ○ | ○ |
| Continuous SMS Sending | Performs continuous sending of multiple SMS messages to UE | ○ | ○ | ○ | ○ | |
| MMS transmission/reception*8 | Performs MMS transmission/reception test | ○ | ○ | ○ | ○ | |
| 2-Cell Testing*9 *10 |
Cell Selection/Reselection (LTE FDD → LTE FDD) |
Performs Cell Selection/Reselection tests between two LTE FDD cells | ○ | − | − | − |
| Cell Redirection (LTE FDD → W-CDMA) |
Performs tests between W-CDMA system from LTE FDD system without continuous packet connectivity | ○ | ○ | |||
| Cell Change Order (LTE FDD → GSM) |
Performs tests between GSM system from LTE FDD system without continuous packet connectivity | ○ | ○ | |||
| CS Fallback (LTE FDD → W-CDMA) |
Performs tests between W-CDMA system from LTE FDD system for voice | ○ | ○ | |||
| CS Fallback (LTE FDD → GSM) | Performs tests between GSM system from LTE FDD system for voice | ○ | ○ |
*1： The opposite examination using two sets of move machines cannot be performed.
*2： Test USIM does not use by CDMA2000
*3： Requires MIMO option (MD8475A-001, MX847550A-020)
*4： Requires HSPA option (MX847510A-001)
*5： Requires HSPA Evolution/DC-HSDPA option (MX847510A-011)
*6： Requires EGPRS option (MX847520A-001)
*7： Requires 1xEV-DO option (MD8475A-032)
*8： Requires separate MMS application sever
*9： Requires 2nd RF option (MD8475A-001) and Multi-cell Software (MX847502A)
*10： Not support for CDMA2000
Specifications
| Items | Specifications |
| RF Connector | RF input/output connector (RF Main, RF Aux1, RF Aux2) Connector: N type, Impedance: 50 Ω, VSWR: ≤1.5 (500 MHz to 3 GHz) Reference oscillator Frequency: 10 MHz Level: TTL level Connector: BNC type Startup characteristics: ±5 × 10−8 (5 minutes after power-on, referenced to frequency 24 hours after power-on) Aging rate: 2 × 10−8/day, ≤1 × 10−7/year (referenced to frequency 24 hours after power-on) Temperature characteristics: ≤±2 × 10−8 External reference input Frequency: 10 MHz, Acceptable frequency range: ±0.5 ppm, Level: ≥0 dBm, Impedance: 50 Ω, Connector: BNC type |
| Transmission Characteristics | Frequency Frequency range: 350 MHz to 3.6 GHz Setting resolution: 100 kHz (Depending on MX847501A used) Accuracy: Based on reference oscillator accuracy Output level Level range: −130 to −10 dBm (Main, Aux1, Aux2) Resolution: 0.1 dB Level accuracy: ±1.0 dB (−120 dBm ≤ Output level, 350 MHz ≤ Frequency ≤ 3 GHz) ±1.2 dB (−120 dBm ≤ Output level, 3 GHz < Frequency ≤ 3.6 GHz) Signal purity Non-harmonic spurious: ≤−40 dBc (at ≥500 kHz frequency offset) Harmonics: ≤−25 dBc Modulation accuracy W-CDMA: ≤3.5% rms (with MD8475A-010, MD8475A-011) GSM: ≤1.5°rms (with MD8475A-020) LTE: ≤3.5% rms (with MD8475A-050) CDMA2000 1X: ρ >0.995 (with MD8475A-030) 1xEV-DO: ρ >0.995 (with MD8475A-032) |
| Reception Characteristics | Frequency Frequency range: 350 MHz to 3.6 GHz Setting resolution: 100 kHz (Depending on MX847501A used) Level Maximum input level: +35 dBm (Average) Input level range: −60 to +35 dBm (with MD8475A-010, MD8475A-011, MD8475A-030, MD8475A-032, MD8475A-050) −30 to +40 dBm (in-burst average power) (with MD8475A-020) Reference level: −60 to +35 dBm Variable range Rx level setting resolution: 1 dB |
| General | Display: Color TFT LCD screen, 12.1 inches (wide type), 1280 × 800 dots External interface Trigger I/O: BNC Call Proc Timing I/O: 15-pin mini D-Sub connector Call Proc Serial I/O: D-sub connector, RS-232C level Call Proc Ethernet A: RJ45 connector, 10/100/1000BASE-T level Call Proc Ethernet B: RJ45 connector, 10/100/1000BASE-T level Handset: RJ-11 connector Headphone: 3.5-mm dia. headphone jack Microphone: 3.5-mm dia. microphone jack USB: USB2.0, Type A, 4 ports RS-232C: D-sub connector, conforms to RS-232C GPIB: IEEE488 connector VGA: Mini D-Sub connector Ethernet: RJ-45 connector 10/100/1000BASE-T, 2 ports |
| Power Supply | 100 Vac to 120 Vac (±10%)/200 Vac to 240 Vac (−15%/+10%, Max.: 250 Vac), 50 Hz to 60 Hz (Rating), ≤480 VA (Max.) |
| Dimensions and Mass | 426 (W) × 221.5 (H) × 398 (D) mm (excl. protrusions),<25 kg (with all options) |
| Temperature Range & Humidity | Operation: +5° to +40°C, Storage: −20° to +60°C, ≤90% (no condensation) |
| EMC | EN 61326-1, EN 61000-3-2 |
| LVD | EN 61010-1 |
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | Anritsu- Signalling Tester (Base Station Simulator) (Model:MD8475A).
Comments are closed.