Features
- 9 kHz to 26.5/43 GHz frequency range; 43 GHz max. built-in pre-amp option
- Best-of-class wide dynamic range over 6 GHz
- 110 GHz max. frequency range; built-in 1st local signal output for external mixer
- For wideband down-converter; built-in 1 GHz IF output band
- 10/31.25/62.5/125 MHz analysis bandwidth options (signal analyzer and modulation analysis functions)
- Supports Noise Figure and BER measurement (options)
- Excellent eco-friendly product with low power consumption of 190 VA min.
Description
■ Outline
The MS2830A-044/045 Signal Analyzer includes a spectrum analyzer function for measuring up to 110 GHz using an external mixer based on the 26.5 GHz/43 GHz upper frequency limit. It supports measurements of Tx characteristics, including adjacent channel leakage power, spectrum mask, and frequency counter, as well as spurious measurements requiring a wide dynamic range.
Installing the 10/31.25/62.5/125 MHz analysis bandwidth option adds signal analyzer functions for checking phenomena that are hard to check using a spectrum analyzer, such as frequency vs. time, phase vs. time, spectrogram, and CCDF. In addition, optional measurement software supports modulation analysis. Moreover, installing a preselector bypass option enables use of the signal analyzer and modulation analysis functions up to 26.5 GHz/43 GHz (MS2830A-044/045). Finally, it can be customized to support a range of application-specific measurements.
- Installing a microwave-band preamp supports measurement of weaker signals.
- Using the 1st local signal output as an external mixer supports measurement of high-frequency signals up to 110 GHz.
- Using the 1st IF signal output as a down converter supports analysis in combination with external equipment.
■ Key Performance
- Frequency Range: MS2830A-044: 9 kHz to 26.5 GHz
MS2830A-045: 9 kHz to 43 GHz - Best-of-class wide dynamic range over 6 GHz
159 dB (at 25 GHz): TOI: ≥+13 dBm, DANL: −146 dBm/Hz
157 dB (nominal, at 40 GHz): TOI: ≥+13 dBm nominal, DANL: −144 dBm/Hz - Preamp up to 43 GHz ⇒ Opt. 068/168: Microwave Preamplifier
- DANL: −156dBm/Hz (at 25GHz)
- DANL: −150dBm/Hz (at 40GHz)
- Measures up to 110 GHz using External Mixer ⇒ Built-in connector to connect external mixer (MS2830A-044/045)
- Frequency Range: 26.5 GHz to 110 GHz
- Connector: SMA-J, 50 Ω
- Local Signal Output: 5 GHz to 10 GHz
- IF Signal Frequency: 1875 MHz
- Used as Wideband Down Converter ⇒ Built-in IF Output Function (MS2830A-044/045)
- Connector: SMA-J, 50 Ω
- IF Output Frequency: 1875 MHz
- IF Output Bandwidth: 1 GHz (3 dB Bandwidth, nominal)
- Gain: −10 dB (nominal)
- 10/31.25/625/125 MHz analysis bandwidth options (signal analyzer and modulation analysis functions)
Opt.006: Analysis Bandwidth 10 MHz (20 MHz max. sampling rate = 50 ns resolution)
Opt.005: Analysis Bandwidth Extension to 31.25 MHz (50 MHz max. sampling rate = 20 ns resolution) [MS2830A-044]
Opt.009: Bandwidth Extension to 31.25 MHz for Millimeter-wave (50 MHz max. sampling rate = 20 ns resolution) [MS2830A-045]
Opt.077: Analysis Bandwidth Extension to 62.5 MHz (100 MHz max. sampling rate = 10 ns resolution)
Opt.078: Analysis Bandwidth Extension to 125 MHz (200 MHz max. sampling rate = 5 ns resolution)Note: An image response is received when setting the bandwidth to more than 31.25 MHz.
This can be used when not inputting a signal frequency outside the MS2830A analysis bandwidth (125 MHz max.).
The MS2690A/91A/92A Signal Analyzer series is recommended for other measurement purposes. - Excellent eco-friendly product with low power consumption of 190 VA min.
MS2830A-044/045: 190VA (nominal)
| Application | Model No. | Name/Functions | Brochure | Product Introduction |
| Spectrum Analyzer | MS2830A-044 MS2830A-045 |
26.5 GHz Signal Analyzer 43 GHz Signal Analyzer |
Download | Download |
| Signal Analyzer | MS2830A-005
MS2830A-006 MS2830A-077 MS2830A-078 |
Analysis Bandwidth Extension to 31.25 MHz (Requires opt.006) Analysis Bandwidth 10 MHz Bandwidth Extension to 31.25 MHz for Millimeter-wave (Requires opt.006, for MS2830A-045) Analysis Bandwidth Extension to 62.5 MHz (Requires opt.006,005/009) Analysis Bandwidth Extension to 125 MHz (Requires opt.006,005/009,077) |
||
| 3GPP LTE (FDD) | MX269020A | LTE Downlink Measurement Software | Download | Download |
| MX269020A-001 | LTE-Advanced FDD Downlink Measurement Software | |||
| MX269021A | LTE Uplink Measurement Software | Download | ||
| 3GPP LTE (TDD) | MX269022A | LTE TDD Downlink Measurement Software | Download | |
| MX269022A-001 | LTE-Advanced TDD Downlink Measurement Software | |||
| MX269023A | LTE TDD Uplink Measurement Software | Download | ||
| WLAN | MX269028A | WLAN (802.11) Measurement Software | Download | |
| MX269028A-001 | 802.11ac (80 MHz) Measurement Software | |||
| WLAN/Bluetooth | MX283027A-001 | WLAN Test Software | Download | |
| MX283027A-002 | Bluetooth Test Software | |||
| W-CDMA/HSPA/HSPA Evolution Base station |
MX269011A | W-CDMA/HSPA Downlink Measurement Software | Download | |
| W-CDMA/HSPA/HSPA Evolution Mobile terminal |
MX269012A | W-CDMA/HSPA Uplink Measurement Software | Download | |
| W-CDMA | MX269030A | W-CDMA BS Measurement Software | ||
| GSM/EDGE | MX269013A | GSM/EDGE Measurement Software | Download | |
| MX269013A-001 | EDGE Evolution Measurement Software | |||
| TD-SCDMA | MX269015A | TD-SCDMA Measurement Software | ||
| TDMA type | MX269017A | Vector Modulation Analysis Software | Download | |
| CDMA2000 Base station | MX269024A | CDMA2000 Forward Link Measurement Software | Download | |
| MX269024A-001 | All Measure Function NEW | |||
| 1xEV-DO Base station | MX269026A | EV-DO Forward Link Measurement Software | ||
| MX269026A-001 | All Measure Function NEW | |||
| Noise Figure Measurement | MS2830A-017 | Noise Figure Measurement Function | Download | Download |
| BER Measurement | MS2830A-026 | BER Measurement Function |
Options
Specifications
Basic Performance
| Items | Specifications | |
| Frequency | Frequency range | 9 kHz to 26.5 GHz (MS2830A-044) 9 kHz to 43 GHz (MS2830A-045) |
| SSB phase noise (500 MHz) |
+18º to +28ºC -115 dBc/Hz (100 kHz offset) -133 dBc/Hz (1 MHz offset) |
|
| General | Dimensions and mass | 426 (W)× 177 (H)× 390 (D) mm (Exclusive of surface projection) ≤15 kg (excluding other options) |
Spectrum Analyzer
| Items | Specifications | |
| Frequency | Resolution bandwidth (RBW) |
Setting range: 1 Hz to 3 MHz (1-3 sequence), 50 kHz, 5 MHz, 10 MHz, 20 MHz*, 31.25 MHz* *: Can be set when with MS2830A-005, Can not be set when with MS2830A-009. |
Comments are closed.