Application
Portable tension tester especially designed for determination of the peel resistance of coated steel pipes. Further, it assesses the adhesive power of other coatings and foils.
Features
The MTT is composed of a control unit with software and a peeling unit. The control unit has power supply by external mains. The measuring process is controlled independently (start/stop). After testing, data evaluation is being supported by the software. A printout of the results per thermal printer is possible as well as the transmission of the measurement data on an USB memory device. The software provides a permanent graphical display of the measured values (force/time). The calculation of minimum, maximum and average value takes place in free selectable segment division after test end. The peeling unit works with separate drives for carriage and stripping. The stripping angle of 90° is automatically adjusted.
|
Mean forward speed
|
10 mm / min.
|
|
Control of forward speed
|
± 2 mm
|
|
Peeling speed
|
10 mm / min
|
|
Sample width
|
max. 50 mm
|
|
Min. clamping length
|
ca. 70 mm
|
|
Peeling travel
|
max. 200 mm
|
|
Measuring range
|
50 – 2000 N
|
|
Peeling angle
|
90° (automatically controlled)
|
|
Min. tube diameter
|
100 mm / 50 mm with extension for small pipes
(optional order number 30-400-201)
|
|
Max. tube diameter
|
free, up to plane surface
|
Comments are closed.