OMRON – General-purpose Relay (Model: G2R-[]-S)

March 1, 2024

1046

Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.

Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

Classification	Enclosure rating	Coil ratings	Contact form
SPDT	DPDT
Plug-in terminal	General-purpose	Unsealed	AC/DC	G2R-1-S	G2R-2-S
LED indicator	G2R-1-SN	G2R-2-SN
LED indicator with test button	G2R-1-SNI (S)	G2R-2-SNI (S)
Diode	DC	G2R-1-SD	G2R-2-SD
LED indicator and diode	G2R-1-SND	G2R-2-SND
LED indicator and diode with test button	G2R-1-SNDI (S)	G2R-2-SNDI (S)

Note: 1. The standard models are compliant with UL/CSA and VDE standards. Also, an EC compliance declaration has
been made for combinations with the P2RF-E and P2RF-S. The Relays bear the CE Marking.
2. Refer to Connecting Sockets, below, for applicable Socket models.
3. When ordering, add the rated coil voltage and "(S)" to the model number. Rated coil voltages are given in the
coil ratings table.

Accessories (Order Separately)

Connecting Sockets

Applicable Relay model	Track/surface-mounting Socket	Back-mounting Socket
Screwless clamp terminal	Screw terminal	Terminals	Model
1 pole G2R-1-S(N)(D)(ND)(NI)(NDI)	P2RF-05S * + (P2CM-S (option))	P2RF-05-E P2RF-05	PCB terminals	P2R-05P, P2R-057P
Solder terminals	P2R-05A
2 poles G2R-2-S(N)(D)(ND)(NI)(NDI)	P2RF-08S * + (P2CM-S (option))	P2RF-08-E P2RF-08	PCB terminals	P2R-08P, P2R-087P
Solder terminals	P2R-08A

* Use of the P2CM Clip & Release Lever is recommended to ensure stable mounting.

Accessories for Screwless Clamp Terminal Socket (Option)

Name	Model
Clip & Release Lever	P2CM-S
Nameplate	R99-11 Nameplate for MY
Socket Bridge	P2RM-SR (for AC), P2RM-SB (for DC)

Mounting Tracks

Applicable Socket	Description	Model
Track-connecting Socket	Mounting track	50 cm (l) x 7.3 mm (t): PFP-50N 1 m (l) x 7.3 mm (t): PFP-100N 1 m (l) x 16 mm (t): PFP-100N2
End plate	PFP-M
Spacer	PFP-S
Back-connecting Socket	Mounting plate	P2R-P *

* Used to mount several P2R-05A and P2R-08A Connecting Sockets side by side.

Coil Ratings

Rated voltage	Rated current*	Coil resistance*	Coil inductance (H) (ref. value)	Must operate voltage	Must release voltage	Max. voltage	Power consumption (approx.)
50 Hz	60 Hz	Armature OFF	Armature ON	% of rated voltage
AC	24 V	43.5 mA	37.4 mA	253 Ω	0.81	1.55	80% max.	30% max.	110%	0.9 VA at 60 Hz
110 V	9.5 mA	8.2 mA	5,566 Ω	13.33	26.83
120 V	8.6 mA	7.5 mA	7,286 Ω	16.13	32.46
230 V	4.4 mA	3.8 mA	27,172 Ω	72.68	143.9
240 V	3.7 mA	3.2 mA	30,360 Ω	90.58	182.34

Rated voltage	Rated current*	Coil resistance*	Coil inductance (H) (ref. value)	Must operate voltage	Must release voltage	Max. voltage	Power consumption (approx.)
Armature OFF	Armature ON	% of rated voltage
DC	6 V	87.0 mA	69 Ω	0.25	0.48	70% max.	15% min.	110%	0.53 W
12 V	43.2 mA	278 Ω	0.98	2.35
24 V	21.6 mA	1,113 Ω	3.6	8.25
48 V	11.4 mA	4,220 Ω	15.2	29.82

* The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of ±10%.

Contact Ratings

Number of poles	1 pole	2 poles
Load	Resistive load (cosΦ = 1)	Inductive load (cosΦ = 0.4; L/R = 7 ms)	Resistive load (cosΦ = 1)	Inductive load (cosΦ = 0.4; L/R = 7 ms)
Rated load	10 A at 250 VAC; 10 A at 30 VDC	7.5 A at 250 VAC; 5 A at 30 VDC	5 A at 250 VAC; 5 A at 30 VDC	2 A at 250 VAC; 3 A at 30 VDC
Rated carry current	10 A	5 A
Max. switching voltage	440 VAC, 125 VDC	380 VAC, 125 VDC
Max. switching current	10 A	5 A
Max. switching power	2,500 VA, 300 W	1,875 VA, 150 W	1,250 VA, 150 W	500 VA, 90 W
Failure rate (reference value)	100 mA at 5 VDC	10 mA at 5 VDC

Note: P level: λ₆₀ = 0.1 x 10^-6/operation

Characteristics

Item	1 pole	2 poles
Contact resistance	100 mΩ max.
Operate (set) time	15 ms max.
Release (reset) time	AC: 10 ms max.; DC: 5 ms max. (w/built-in diode: 20 ms max.)	AC: 15 ms max.; DC: 10 ms max. (w/built-in diode: 20 ms max.)
Max. operating frequency	Mechanical: 18,000 operations/hr Electrical: 1,800 operations/hr (under rated load)
Insulation resistance	1,000 MΩ min. (at 500 VDC)
Dielectric strength	5,000 VAC, 50/60 Hz for 1 min between coil and contacts*; 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity	5,000 VAC, 50/60 Hz for 1 min between coil and contacts*; 3,000 VAC, 50/60 Hz for 1 min between contacts of different polarity 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
Vibration resistance	Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Malfunction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistance	Destruction: 1,000 m/s² Malfunction: 200 m/s² when energized; 100 m/s² when not energized
Endurance	Mechanical: AC coil: 10,000,000 operations min.; DC coil: 20,000,000 operations min. (at 18,000 operations/hr) Electrical: 100,000 operations min. (at 1,800 operations/hr under rated load) (DC coil type)
Ambient temperature	Operating: -40°C to 70°C (with no icing or condensation)
Ambient humidity	Operating: 5% to 85%
Weight	Approx. 21 g

Note: Values in the above table are the initial values.
*4,000 VAC, 50/60 Hz for 1 minute when the P2R-05A or P2R-08A Socket is mounted.

Caution: All units are in millimeters unless otherwise indicated.

Relays with Plug-in Terminals

SPDT Relays
G2R-1-S, G2R-1-SN, G2R-1-SNI (S)
G2R-1-SD, G2R-1-SND, G2R-1-SNDI (S)

DPDT Relays
G2R-2-S, G2R-2-SN, G2R-2-SNI (S)
G2R-2-SD, G2R-2-SND, G2R-2-SNDI (S)

Resource & Download

G2R-[]-S Data Sheet

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.

INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | OMRON – General-purpose Relay (Model: G2R-[]-S).