Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
| Two types of conditions define the user safety |
| – Measurement conditions: |
- A current of measurement much lower than the current of non-fire
- A connection on the line of test only for the activated period of measurement
- A flow of the residual electrical charges
|
| – Safety conditions: |
- The respect of a safety level of maximum current if there is a problem with the equipments (breakdown of electronics, internal short-circuit,…)
- Permanent self-checking of the internal functions of our equipments before connection on the measurement channel
|
| Measurement principle |
| The Ohmmeter works according a principle of measurement based on 4 wires, which makes it possible to be freed from parasitic resistances of lines. The principle relies on an internal device of permanent selfcalibration which guarantees, over a short and long-term period of time, the high reliability of the measurements carried out by continuously correcting the drifts of profit and Offset.
All parameter settings are entered by keyboard with a locking of the parameters by key. Our units are equipped with dry contact output and a RS232 connection that allows process automation and implementation of traceability.
On demand, our existing products can be adapted to your specific requirements: Adapted protocole RS232, other testing voltage or measuring current, integration, processing software…
We suggest to yearly carry out the calibration and to control the safety functions of your equipments. |
| Typical applications |
– Automotive airbag inflator / module electrical functional tests
– Seatbelt pre-tensioner actuator / module functional electrical check
– Automotive power / fuse center continuity and leakage characterization |
– PCB / PWB and general purpose short/open circuits testing
– High speed parralel soak dual inflator or dual test station electrical seek / check
– Multicontact / switch dry circuit continuity and leakage resistance measurements |
|
| Specifications |
IND 43 |
IND 44 |
IND 45 |
| Channel number |
1 / 2 / 4 |
1 |
1 / 2 ohmmeter channels |
+ 1 megohmmeter channel |
Measurement type
Range |
4 wires
0 / 15 Ω |
2 wires
0 / 100 MΩ |
4 wires
0 / 15 Ω |
2 wires
0 / 100 MΩ |
| Measuring current |
10 mA |
20 mA |
| Testing voltage |
45 V or 500 V |
50 V, 500 V or 50 / 500 V |
| Accuracy |
0.1 % RDG |
1 % at 0 / 50 MΩ
2 % at 50 / 100 MΩ |
0.1 % RDG |
1 % at 0 / 50 MΩ
2 % at 50 / 100 MΩ |
| Resolution |
0.01 Ω |
0.1 MΩ |
0.01 Ω |
0.1 MΩ |
| Protection |
Up to 380 V
(110 V on resistance range) |
Up to 380 V
(110 V on resistance range) |
| Setup |
Keyboard – Key-locking of parameters for safe use |
| Offset correction of line |
Through a measurement of the line value with validation |
| Communication |
RS 232 or automation |
| Power supply |
220 V / 50 Hz with storage of parameters and counters |
| Options |
– Integration into test bench
– Data processing software
– Adapted protocole RS 232
– Other testing voltage or measuring current
… Please contact us for further options to fit further specific requirements |
| Switching units |
INT 17 |
INT 17 / 17 HT |
INT 17 / 17 HT |
|
| INT switching units |
INT units are aimed to switch between:
- devices designed for control of electrical testing on pyrotechnical instruments (IND series)
- tested systems (initiators, airbags, firing units…)
Contact switches are usually monitored by shared automation (0-24 V) and earth bounding control (contact or transistor). Automation INPUTS are protected against any change of polarity. |
| Specifications |
INT 17 |
INT 17 HT – AS 201 full compliant (Autoliv standard) |
| For instruments |
IND 43 / 44 / 45 |
IND 44 / 45 |
| Input voltage |
Up to 10,000 V (as stated in AS201 standard) |
| Front side |
10 high voltage BNC connectors
4 LEDs |
| Back side |
DB9 Automate
Connection to IND instrument
Earth contact (in order to discharge the measurement channels from any remaining electrical charges, once the device is in standby mode) |
| Power supply |
Supplied with 7 point Bendix |
|
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó.
Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | AOIP-PYROTECHNICAL SAFETY OHMMETERS (Model: IND 43 / 44 / 45 + SWITCHING UNITS: INT 17 / 17 HT).
IND 43 data sheet
Comments are closed.