- Included graphical networking Configurator software
- Supported services: DPV0 Master Class 1/2, DPV0 Slave
- Compatibility with LabVIEW FPGA 8.5 and later
- PROFIBUS DP RS485 baud rates from 9600 bits/s to 12000 kbits/s.
This PROFIBUS one-port module connects NI programmable automation controllers (PACs) to PROFIBUS industrial networks as powerful masters or slaves. The interface includes the NI-PROFIBUS for CompactRIO driver for human machine interface (HMI) and SCADA applications, as well as graphical networking Configurator software. You can perform PROFIBUS device automated test using these interfaces.
Featuring NI LabVIEW FPGA Module compatibility, NI Single-Board RIO and CompactRIO systems can be added as slave or master nodes to a PROFIBUS industrial network. With more than 20 million installed nodes, PROFIBUS is one of the leading industrial networks for reliably connecting programmable logic controllers (PLCs), I/O, sensors, and drives over long distances in industrial environments.
Specifications Summary
| General | |
| Product Name | CompactRIO PROFIBUS Master/Slave Module |
| Product Family | Industrial Network Interfaces |
| Form Factor | CompactRIO |
| Protocol | PROFIBUS |
| Part Number | 781352-01 |
| Operating System/Target | FPGA |
| LabVIEW RT Support | Yes |
| Voltage | 5 VDC |
| Current | 20 mA |
| Source | Additional Power Required , Externally Powered |
| OEM Available | No |
| Port Information | |
| Number of Ports | 1 |
| Max Baud Rate | 12000 kbits/s |
| Min Baud Rate | 9.6 kbits/s |
| Termination | External |
| Special Features | |
| Hardware Timestamping | Yes |
| Physical Specifications | |
| Length | 7.1 cm |
| Width | 2.3 cm |
| Height | 8.8 cm |
| I/O Connector | 9-pin D-Sub (DB-9) |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | 50 °C |
Comments are closed.