 Compact and Light Weight
With a weight of only 180g, the AD-3253 is easy to carry and easy to use. Its light weight allows hours of fatigue free operation.
Easy to Operate
Simply calibrate the AD-3253 to the material to be tested, place the probe on the test material and the AD-3253 automatically
displays the correct thickness. No special qualifications or training are required.
Easy to Read LCD Display
Displays both measured thickness and sonic velocity of the sample.
Sonic Velocity Stored into Memory
Sonic velocities are easily entered into the AD-3253 unit through simple up and down keys. When a new entry is made, it replaces
the previous entry and stores the new one until changed, even if the unit is powered off or the battery is changed.
Low Battery Indicator
Low Battery appears when the battery is low, after which the operator has one hour of operation before battery replacement is required.
Able to determine unknown Sonic Velocities
Simply calibrate the AD-3253 against a known test block and place the probe on the sample material of the same thickness.
One button operation sets the unit to the proper thickness and the AD-3253 automatically enters the correct sonic velocity.
Selectable Units of Measure
When performing thickness measurements, the operator is able to easily select between inches or millimeters units of measure.
Automatic Power Off Function
The AD-3253 operates continuously for more than 30 hours off of one AA alkaline battery (25", 5 mm sample thickness) and,
automatically powers off the unit after 5 minutes of non-use, substantially extending operating life between battery changes.
Applications
Thickness Measurement, Corrosion Test, Inspection
Samples
Steel, Titanium, Aluminium, Copper, Brass, Glass, Ceramic, Plastic, etc. |
Comments are closed.