The ETC series is designed for tests and verifications of temperature sensing devices in the field. This instrument is ideal when time is a critical factor and the highest accuracy is not a requirement. Reduced size and weight are important considerations as the unit may fit into a toolbox or instrument carrying case, and can be used for sensors that are difficult to access. The ETC calibrator heats up by up to 100°C (212°F) per minute and completes a full dual-point test in less than 10 minutes, including stability time.
One-key-one-function user interface provides immediate access to setting the temperature and the auto-step timesaving function. The stability indicator provides audible and visual prompts when the temperature is stable. This function also includes a 3-minute countdown before the stable condition. Stainless steel and rubber side panels make the instrument suitable for many years of faithful duty in an industrial environment.
One of the models – the ETC-400 R is designed for optimum speed in connection with calibration of infrared thermometers. The 36 mm (1.4 in) target provides the optimum size for reliable calibration of infrared thermometers in the process industry as it is designed for high accuracy and long-term stability while maintaining speed.
Models and temperature ranges
ETC-125A -10 to 125°C (14 to 257°F)
ETC-400A 28 to 400°C (82 to 752°F)
ETC-400R 28 to 400°C (82 to 752°F)
Features for the ETC
- Complete series of temperature and IR calibrators
- Multi-hole well design
- RS232 and JOFRACAL calibration software
- Multi information display
- Auto stepping
- Stability indicator
- Count down timer (shows when unit is stable)
- Programable maximum temperature
- Fast simulation/training mode
- Re-calibration from keyboard
|
Selection guide CTC Series |
ETC 125 A |
ETC 400 A |
ETC 400 R |
|
Temperature range @ ambient 23°C / 73°F |
-10 to 125°C (14°F to 257°F) |
28 to 400°C (82°F to 752°F) |
28 to 400°C (82°F to 752°F) |
| Heating time |
ambient to |
ambient to |
ambient to maximum |
| Stability |
0.05°C / 0.09°F |
0.15°C / 0.27°F |
0.3°C / 0.54°F |
| Accuracy |
0.5°C / 0.9°F |
0.5°C / 0.9°F |
0.5°C / 0.9°F |
| Immersion depth |
110 mm / 4.3 in. |
105 mm / 4.1 in. |
– |
| Holes for device-under-test |
– |
– |
3 mm hole for external reference probe |
| ETC125A type 01 |
12.5 – 8 – 6 – 4 mm |
– |
– |
| ETC125A type 02 |
1/2 – 3/8 – 1/4 – 5/32 in. |
– |
– |
| ETC400A type 11 |
– |
1/16 – 1/8 – 5/32 – 1/4 – 3/16 in. |
– |
| ETC400A type 12 |
– |
1/16 – 3/16 – 3/8 – 1/4 – 1/8 in. |
– |
| ETC400A type 21 |
– |
2 – 3 – 4 – 4 – 6 mm |
– |
Comments are closed.