Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
The DPI 832 electrical loop calibrator is a compact, easily portable solution for your loop calibration needs. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
Features
- Dual reading capability: source mA, mV or V and simultaneously measure mA or capture switch trip values
- Measure or source mA, mV and V
- 24V loop supply to power transmitters and loops
- Large backlit display, menu driven interface
- HART® loop resistor
- Robust and weatherproof
- Compact, simple to use, easy to carry
- Convenient, one-handed operation
- Secure grip, impact resistant, elastomer protected
- Plug/play connector for Intelligent Digital Output Sensor (IDOS™) Universal Measurement Modules
|
Applications
- Process instrument test and maintenance
- Control loop setup and diagnostics
- Set-up DCS, PLC and signal conditioners
- Valve positioner adjustment
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
|
Specifications
Instrumentation Test and Loop Maintenance
| DPI 832 Electrical Loop Calibrator |
Measures or sources mA, mV, V and captures switch trip values. It is the ideal instrument for process technicians to check and maintain transmitters, control loops, DCS, PLC input cards and signal conditioners. |
| Programmable Step and Ramp Outputs |
Simplify calibrations and facilitate system diagnostic checks. The ramp output provides a stimulus for rate of change indicators. |
| Adjustable “Nudge” Value |
Provides an incremental output for accurately setting valve positioners and testing switches, relays, trips and alarms |
| Simultaneous Dual Readings |
Simplify transmitter set-up and calibration; for example, source mV, V or mA and measure mA |
| Advanced Features |
Hold, maximum/minimum/average (with time stamp), scaling, tare (offset) and damping filter facilitate system checks and troubleshooting |
| Two Independent 24 V Power Supplies |
Energize transmitters and control loops |
| Automatic Switch Test |
Captures open/closed trip values providing a fast and highly accurate “safety system” check |
| HART Resistor |
Can be switched into the loop when required for a HART digital communicator and avoids the inconvenience of carrying a 250 O resistor |
IDOS Flexibility
| Intelligent Digital Output Sensor (IDOS) |
Universal Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar). |
| Total Flexibility |
IDOS modules can be used with any compatible instrument; for example, a DPI 832 electrical loop calibrator can become a fully featured pressure calibrator. |
| Plug and Play |
Modules are interchangeable between instruments, requiring no set-up or instrument calibration.
Please refer to IDOS Universal Pressure Modules data sheet. |
DPI 800 Series Common Specification
| Operating Temperature |
14°F to 122°F (-10°C to 50°C) |
| Storage Temperature |
-4°F to 158°F (-20°C to 70°C) |
| Humidity |
0% to 90% non-condensing, Def Stan 66-31, 8.6 Cat III |
| Shock and Vibration |
BS EN61010:2001, Def Stan 66-31, 8.4 Cat III |
| EMC |
BS EN61326-1:1998 + A2:2001 |
| Safety |
Electrical BS EN61010:2001, CE marked |
| Display |
Graphic LCD with backlight. Resolution 99999 |
| Size and Weight |
7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 14 oz (400 g) |
| Batteries |
3 AA alkaline, >70 hours measure, >10 hours 24 mA source (24V @ 12 mA) |
|
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó.
Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | DRUCK-Electrical Loop Calibrator (Model: DPI 832).
Comments are closed.