Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
The DPI 841/842 is the ideal instrument for process technicians and electronic engineers, providing a highly accurate calibration standard and versatile test tool. It measures Hz, kHz, CPM, CPH and pulses. Dedicated features facilitate test and maintenance of electronic circuits and frequency instruments including frequency meters, batch counters, tachometers, motion pickups, integrators and flowmeters.
Features
- Advanced frequency meter and generator with three output waveforms from 0.1 V to 24 V amplitude
- Measure or source 0.01 Hz to 50 kHz
- CPM, CPH and totalizing counter
- Sine, square and triangular waveforms mA measure, switch test and 24V loop power
- Large backlit display, menu driven interface
- HART® loop resistor
- Robust and weatherproof
- Compact, simple to use, easy to carry
- Convenient, one-handed operation
- Secure grip, impact resistant, elastomer protected
- Plug/play connector for Intelligent Digital Output Sensors™(IDOS) Universal Measurement Modules
|
Specifications
DPI 841 Frequency Loop Calibrator
| Automatic Trigger |
Detects the best value regardless of waveform or amplitude |
| Frequency Scaling |
Reads in process units; e.g. flow or revolutions/minute |
| Programmable Step and Ramp Outputs |
Simplify calibration and diagnostics |
| Adjustable “Nudge” Value |
Provides an incremental output for setting switches, relays, trips and alarms |
| Advanced Features |
Hold, maximum/minimum/average (with time stamp), scaling, tare (offset) and damping filter facilitate system checks and troubleshooting |
DPI 842 Frequency Loop Calibrator
| Dual Readings |
Provides simultaneous frequency output and mA measurement for transmitter and loop maintenance |
| 24 V Power Supply |
Energize transmitters and control loops |
| Automatic Switch Test |
Captures open/closed trip values providing a fast and highly accurate “safety system” check |
| HART Resistor |
Can be switched into the loop when required for a HART digital communicator and avoids the inconvenience of carrying a 250 O resistor |
IDOS Flexibility
| Intelligent Digital Output Sensor (IDOS) |
Universal Pressure Modules are available from 10 inH2O to 10,000 psi (25 mbar to 700 bar) |
| Total Flexibility |
Means IDOS modules can be used with any compatible instrument; for example, a DPI 842 frequency loop calibrator can become a fully featured pressure calibrator |
| Plug and Play |
Modules are interchangeable between instruments, requiring no set-up or instrument calibration. |
DPI 800 Series Common Specification
| Operating Temperature |
14°F to 122°F (-10°C to 50°C) |
| Storage Temperature |
-4°F to 158°F (-20°C to 70°C) |
| Humidity |
0% to 90% non-condensing, Def Stan 66-31 8.6 Cat III |
| Shock and Vibration |
BS EN61010:2001, Def Stan 66-31, 8.4 Cat III |
| EMC |
BS EN61326-1:1998 + A2:2001 |
| Safety |
Electrical BS EN61010:2001. CE marked |
| Display |
Graphic LCD with backlight |
| Size (l x w x h) and Weight |
7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 14 oz (400 g) |
| Batteries |
3 AA alkaline, >60 hours frequency measure, 10 hours mA source (24 V @ 12 mA) |
| Electrical Connectors |
Four (4 mm) sockets |
Accessories
| IO800A |
Soft fabric carrying case with accessory pocket |
| IO800B |
Belt clip, wrist strap/hanging loop and bench stand |
| IO800C |
NiMh batteries with charger (charged externally) |
| IO800E |
Data logging upgrade and RS232 lead |
|
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó.
Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | DRUCK-Frequency Calibrator/Loop Calibrator (Model: DPI 841/842).
Comments are closed.