The EiUK PC4is an appliance for verification and calibration of pressure sensors, pressure gauges, as well as pressure switches for low pressures. The combination pressure measuring unit and pressure generator allows a variety of applications in the laboratory as well as in the field.
The EiUK PC4 can be used with battery (9V E-block) or from the mains (plug-in power supply). The robust inductive measuring cell covers a wide pressure measuring range by means of a 1 : 5 pressure range selector.
The EiUK PC4 can be delivered for 3 standard measuring ranges. Response time of the measuring signal can be selected for 3 steps. The pressure is displayed on a high contrast LC display with 12.5 mm characters. An analogue output is available on request. For greater volumes an integrated hand pump is used to generate pressure and metal belows is used for precise adjustment. Two integrated valves are used to vent the measuring equipment.
PC4 Benefits and Features
- Pressure Calibrator with internal pressure source up to 1000 mbar
- Pressure
- Vacuum
- Differential Pressure
PC4 Technical Specification
| Technical Specification: | |||
| Type: | PC4-10 | PC4-100 | PC4-1000 |
| Pressure range: | 0…10 mbar | 0…100 mbar | 0…1000 mbar |
| Switch-selectable to: | 0…1.999 mbar | 0…19.99 mbar | 0…199.9 mbar |
| Overload: | 10 times | 10 times | 2 times |
| Measurement principle: | inductive | ||
| Medium: | non-aggressive dry clean gases | ||
| Wetted parts: | Ni, Al, CuBe, PU | ||
| Linearity: | 0.2% FS | ||
| Hysteresis: | 0.1% max. FS | ||
| Long term stability: | ±0.5% per year (typical) | ||
| Sensor volume: | appr. 3 ml | ||
| Volume increase: | appr. 0.2 ml at nominal pressure | ||
| Pump: | displacement volume variable | ||
| Bellows (fine adjustment): | displacement volume appr. 25 cm³ at 20 crankshaft rotations | ||
| Power supply: | 9 V E-Block or Plug-in power supply 230 VAC 50/60 Hz | ||
| Current consumption: | appr. 10 mA | ||
| Protection: | 250 mA | ||
| Supply influence: | < 0.05% | ||
| Option: | analogue output 0…1 V (max. load resistance > 2 KOhm) | ||
| Display: | LCD 3 1/2 digits (12.5 mm); Option: LCD 4 1/2 digits (12.5 mm) | ||
| Response time: | adjustable 0.3 / 1 / 2 seconds | ||
| Pressure connections: | diameter 6.6 mm x 1 mm (for flexible hose with 6 mm diam.) | ||
| Electrical connections: | power supply jack plugs; 4 mm banana plugs for optional analogue output | ||
| Temperature influence: | zero point ±0.03% FS/K; Span: ±0.03% FS/K | ||
| Temperature range: | specified range from +10°C to +40°C | ||
| Humidity: | up to 80% relative humidity | ||
| Storage temperature: | -10°C…+70°C | ||
| Housing: | bench type, in aluminum, 248 x 225 x 90 mm | ||
| Shock resistance: | 1 g | ||
| Housing colour: | grey, front green anodized | ||
| Protection class: | III; protection degree: IP 30 | ||
| Standadization: | EN 50081-1; EN 50081-2; EN 50082-1; EN 50082-2; EN 61010 | ||
| Weight: | appr. 2 kg |
PC4 Applications
- Mobile and stationary pressure standard for low pressure and vacuum
- Mobile and stationary of all kind of pressure reading instruments
- Mobile and stationary pressure source for calibration purposes
Comments are closed.