The series includes different models for pressure ranges from -1 to 700 bar with an accuracy up to 0.025% of reading.
There are models with inherent security (certified by ATEX) especially designed for potential explosive areas and with HART protocol built-in that allows the operator to use the instrument with digital transmitters.
The full-function models can automatically execute and document a complete test strategy.
Typical applications
Calibration and certification of pressure transmitter, manometers, etc
Products Guide
|
Model |
mA |
V |
Tc |
RTD |
P int |
P ext. |
n. CH |
Basic |
|
|
|
|
|
X |
|
|
±0.05% FS |
|
|
X |
X |
|
meas |
X |
X |
2 |
±0.025% FS |
|
|
X |
X |
|
|
X |
|
2 |
±0.05% meas |
|
|
X |
X |
|
|
X |
X |
2 |
±0.025% FS |
|
|
X |
X |
X |
X |
X |
X |
2 |
±0.025% meas |
Products List
MicroCal MCK
Setting the standard for on-board preventative maintenance
The Microcal MCK is an on board Pressure, Temperature and Electrical calibration kit
MicroCal P4
The MicroCal P4 digital pressure gauge is a pressure-measuring instrument with an integrated pressure sensor for the measurement of differential, relative or absolute pressures and vacuum.
MicroCal P20
MicroCal P20 Pressure Calibrator is a versatile calibration instrument that combines advanced sensor technology with latest developments in pressure instrumentation.
MicroCal P100
MicroCal P100 has been designed for industrial world requirements, in which characteristics such as compactness, ruggedness and reliability, are very important, as well as accuracy, linearity, and stability.
MicroCal P200
MicroCal P200 Pressure Calibrator is a versatile calibration instrument that combines advanced sensor technology with latest developments in pressure instrumentation.
MicroCal PM200
MicroCal PM200 is a pressure module designed to add the pressure capability to the MicroCal 200/2000+ signal calibrators.
2 bar pump
The F3280013 manual pump is compact and can generate pressures up to 3000 mbar and the vacuum up to -850 mbar.
40 bar pump
The manual pump F3280019 has been designed with a wide range of pressure generation to fit the most tests and calibrations of pressure transmitters.
700 bar pump
The pump F3280015 has been designed for the verification and the calibration of pressure transmitters, pressure switches, indicators and manometers.
Kit for 700 bar pump
This kit, used with the hydraulic pumps F3280015 let the operator work in security with high pressures up to 700 bar.
Comments are closed.