Application:
The general purpose external pressure level transmitter is offered in two styles of termination and provides continuous level measurement up to 69' (21m) of water column with a 4-20 mA signal output. Select the -S_01 level sensor for cable termination or the -S_11 level sensor for conduit termination with an integral junction box. This liquid level sensor is well suited for clean liquid or gas media. Applications include cutting oil and air.
Features:
Corrosion resistant 316 SS body with threaded mount
Available with polyurethane cable or junction box termination
Automatic temperature compensation for accurate measurement
Specifications:
Range: -S0X1: 0 to 5 psi (0.34 bar),
0 to 11' (0 to 3.4m) wc
-S2X1: 0 to 15 psi (1 bar),
0 to 34' (0 to 10.4m) wc
-S4X1: 0 to 30 psi (2 bar),
0 to 69' (0 to 21.1m) wc
Accuracy: ± 0.25% of full scale
Configuration: None, fixed span
Supply voltage: 13-30 VDC
Loop resist.: 1300 Ohms max @ 30 VDC
Signal output: 4-20 mA, two-wire
Process temp.: F: 0° to 200°
C: -18° to 93°
Temp. comp.: Automatic
Ambient temp.: F: 0° to 175°
C: -18° to 79°
Proof pressure: 2 x full span
Response time: 50ms
Weight: 10 oz (283 g)
Enclosure rating: NEMA 4X (IP65)
Termination: -SX01: Cable
-SX11: Junction box
with 1/2" NPT conduit
Cable type: -SX01: 2-cond., shielded
Enclosure mat.: 316 SS
Cable material: -SX01: Polyurethane
Process mount: 1/4" NPT
Trans. material: 316 SS & 316L SS
Classification: General purpose
Compliance: CE
Cable length: -SX01: 9' (2.7m)
Comments are closed.