WEB-based temperature and humidity measurement with two Digital Inputs for dry contacts. Supports SNMP and the SensDesk online portal.
Sends an e-mail when a contact is closed or the temperature is high. Supplied with PDMS – Windows software for producing MS Excel reports.
Supports SNMP. Supplied with one temperature probe, power adapter and software.
Web thermometer with two digital inputs for dry contacts. Sends an e-mail alert when the temperature is too high/too low or a contact is closed. Connected probes and detectors can be monitored using a Web interface or a mobile app. Comes with the HWg-PDMS software for Windows for displaying graphs and exporting data to MS Excel. HWg-STE plus is compatible with SNMP and can be used with third-party applications. Connect several HWg-STE plus units to the www.SensDesk.com online portal. This works like a cloud application. Nothing to configure, no NAT or firewall. Simply activate the portal connection and you can check the temperature in your home under your desk, in your server room, or at your customer's site – no matter where you are. All your sensors are shown at a single screen in a mobile app.
Optional accessories:
|
![]() |
“HWg-STE plus” compared with “HWg-STE”
Features
- Ethernet: RJ45 (10/100BASE-T)
- WEB: Built-in web server
- Digital inputs: 2x dry contact input
- Sensors: 2x RJ11 (Max 2 temperature or humidity probes)
- M2M communication protocols: SNMP, XML, HWg-Push
- Alerts (value out of defined range): E-mail
- Recommended online portal: SensDesk.com – free online portal
- Recommended Windows software: HWg-PDMS (logging, graphs, export to MS Excel)
- Simple installation (supports DHCP and sensor autodetection)
- Connects to third-party SNMP monitoring systems (SNMP MIB, XML)
Plugin for Nagios, OpenNMS, Cacti and more.. - 0.1°C resolution, display in °C or °F
- Security protected with a password
- Supplied with a power adapter and one temperature probe
- In addition to the supplied probe, a second temperature or humidity probe can be connected
Usage examples
-
A/C failure monitoring
Remote environment monitoring, rising temperature indicates air conditioning failure. -
Environment and door monitoring over SNMP
Detection of open door, power failure, temperature and humidity, connected to a NMS (Network Monitoring System, such as Nagios). -
Cooler/freezer monitoring
Sends an e-mail if the refrigerator door is open for too long, or the temperature is too high or too low. Logging in the PDMS application or the SensDesk online service. -
Equipment and premises monitoring
Detection of security system alarms, open door, or presence of people (PIR sensor). - Food storages
Oversees optimal storage conditions. With application software, HACCP reports can be created.
![ethernet thermometer for IP temperature monitoring, e-mail alert to high temperature](http://www.hw-group.com/products/HWg-STE-plus/images/HWg-STE_plus_icons_250.png)
Remote monitoring of 19" racks
- IP thermometer HWg-STE plus is placed in the cabinet
- Temperature and humidity monitoring inside a rack
- SNMP monitoring
- Sends an e-mail whenever the door opens (to monitor access).
- Second digital input can be used for other detectors:
- Smoke (fire) detector
- Rear door monitoring
- Water flood detector
- Power failure detector
- and so on…
Several temperature sensors on a single screen – SensDesk.com portal
- Two HWg-STE plus thermometers are connected to the www.SensDesk.com online portal.
- Nothing to configure, simply connect HWg-STE plus to the network and enable online connection to your account.
- SensDesk.com alerts you whenever a value is out of specified range, a probe is disconnected, or the Internet connection of your web thermometer fails.
- All sensors connected to your user account can be displayed on a single tablet or phone screen in a mobile app for iOS (iPhone, iPad) and Android devices.
Software and applications
- Configuration: UDP Config – Configuring the IP address
- Monitoring and logging: HWg-PDMS – Monitoring software with MS Excel reporting
- Online service for remote monitoring: www.SensDesk.com
- Mobile phone app: iPhone, Android and more..
- Third-party software: SNMP (Nagios, Cacti, Zabbix, The Dude, Paessler PRTG, OpenNMS, HP OpenView, IBM Tivoli, Axence nVision, Ipswitch WhatsUp, CA NSM, SNMPc and more.. )
- For programmers: HWg-SDK contains interface descriptions and examples of using M2M protocols in several programming languages
(JAVA, PHP, Borland C++ Builder 6.0, Microsoft Visual C++ 6.0, Borland Delphi 6.0, Microsoft Visual Basic & Excel VBA, VB.NET, C code for Linux, JavaScript (AJAX) Microsoft Visual C# 2005 (.NET))
![HWg-PDMS: Cabinet temperature monitoring system](http://www.hw-group.com/images/Software-portal-application_350.png)
Resource & Download
HWg-STE plus flyer
HWg-STE plus manual
Configuration: UDP Config
Graphs: HWg-PDMS 2.3.0
- Current firmware: Firmware v.2.0.4
– MIB available for download from the product GUI
Comments are closed.