HWg-Remote monitoring sensors over LAN (Model: Poseidon XXXX)

Poseidon 2250	Poseidon2 3266	Poseidon2 3268	Poseidon2 3468	Poseidon2 4002
Photo	1  2  3  4 5	1 2 3 4 5 6 7 8	1  2  3  4	1  2  3	1   2  3
Online demos	Online demo	Online demo	Online demo	Online demo	Online demo
Digital Inputs (DI)	3 DI	4 DI	4 DI	4 DI	12 DI
Door contact, Flood (water level) detector, Smoke and gas detectors, Voltage detector, Motion detector
Digital Outputs (DO)	2 (RS-232)	–	2 DO (relay)	2 DO (relay 110/230V)	4 DO (relay)
1-Wire sensors RJ11 bus up to 60m	10 sensors	8 sensors	8 sensors	8 sensors	16 sensors
Temperature or Humidity
1-Wire UNI sensors RJ11 bus up to 60m
Voltage 0-15V / 0-60V, Current 0-20mA / 4-20mA / 0-30A AC, Light (luminous intensity), Pt100/Pt1000, Water Leak Detection, ..
Industrial sensors RS-485 bus up to 1000m	26 sensors	–	–	–	24 sensors
Temperature, Humidity, Air preassure, Voltage, Current
Power	12V	9-30V	9-30V	9-30V / -48V	9-30V
Logger capacity	40 000 records	250.000 records	250.000 records	250.000 records	250.000 records
HTML, XML, Flash setup
Modbus/TCP
SNMP, SNMP Traps
SMTP Email
Local SMS Alarms (local GSM modem + SIM card)		–	–	–
HWg-SMS-GW client (remote GSM modem support)
www.SensDesk.com Online portal compatible	–
HWg-SDK for programmers (Software Development Kit)
Firmwares	Firmware v.1.0.13	Firmware v.1.2.11	Firmware v.1.2.11	Firmware v.1.2.11	Firmware v.1.2.11
Manual	Poseidon2 family manual
Note	Previous model: Poseidon 3266	Previous model: Poseidon 3268	Previous model: Poseidon 3468	Previous model: Poseidon 4002
Configuration SW	UDP Config
Application software	HWg-Trigger, HWg-PDMS
Third party SW applications	Nagios, Zabbix, HP (OpenView) NNM, IBM Tivoli, MSC Operations Manager, The Dude, Paessler IPCheck, Ipswitch WhatsUp, Axence, LoriotPro, GFi NSM, SNMPc 7, CA NSM, ActiveXperts NM, Intellipool NM, ATEAS, AlViS
* Check the power limitation how many sensors can be connected per one RJ11 port (typically max 2 1-Wire UNI sensor per one port)

Sensors, Probes & Detectors

• Temperature
• Humidity
• Smoke / gas detectors
• Flood detectors
• Voltage / current sensors
• Motion and position detectors
• Bus accessories 

Accessories 

1-Wire (RJ11)

• Poseidon T-Box
  Hub for connecting up to 5 sensors on the 1-Wire bus (5x RJ-11)
• Poseidon T-Box2
  Hub for connecting of 2 sensors on the 1-Wire bus (2x RJ-11)
• Poseidon Spider
  The RS-485 line converter to 4x RJ12 1-Wire. Connect four 1-Wire sensors to RS-485. 

RS-485 (RJ45)

• Poseidon B-Cable reduction
  It converts RS-485 + power supply for RJ45 connector to terminal board – 4 pins ( A,B,+,- )
• Sensor RJ45 MIDDLE cable(details)
  Connecting cable about 0.5 meter long, enables to connect 4 pins ( A,B,+,- ) from terminal board to RJ45 connector. Method how to connect the middle sensors.
• Sensor RJ45 LAST cable(details)
  Connecting cable about 0.5 meter long, enables to connect 4 pins ( A,B,+,- ) from terminal board to RJ45 connector. Method how to connect the last sensor in line.
• Poseidon S-Hub [600 041]
  RS-485 line hub for 8+1 RJ45 connectors and TP cables. S-Hub can be used as a power supply for all connected sensors.