Land-Carbon Monoxide Monitor ( Model: Series 9000 )

6
532
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

 Overview:

Series 9000 cross stack infrared, in-situ carbon monoxide monitors provide high accuracy and reliability, coupled with straightforward installation and setup and is suitable for a wide range of industrial combustion efficiency monitoring applications. This carbon monoxide monitor is designed to provide the operator with a fast response measurement, essential to the efficient combustion control of any boiler system.

Series 9000 Carbon Monoxide Monitor

Series 9000 Carbon Monoxide Monitor

 Key Benefits:

– Direct continuous measurement of Carbon Monoxide
– True representative measurement – reading averaged across entire duct
– Improved combustion control and efficiency savings
– Low running and maintenance cost
– High reliability – robust design
– Simple installation – advanced alignment features
– Over 20 years of experience in carbon monoxide monitoring – 4th generation product

 Specification:

Technical Details
Measuring Cross Stack, In-Situ
Technique: Infrared Gas Cell Correlation Technique with Automatic Cell Leak Detection (9200 Mk II only)
System Performance
Length: 1.2m / 4 ft standard
Measuring Range 0 – 10000 ppm.m
Other ranges selectable from the keypad
Pathlength: 0.5 to 10 m/1.6 to 32 ft 
Model 9100            Model 9200MkII
Linearity: ± 3% of range             ±2 of range
Resolution: 1 ppm
Environmental
Flue gas temperature range: up to 370°C / 700 °F
Environment rating: IP65 / NEMA 4
Inputs/Outputs
Flue Gas temperature input: Thermocouple, Type K Chromel/Alumel input into the transmitter unit or 4 – 20 mA temp. input
Serial interface: Isolated RS232 or RS485 communication (Modbus) for: CO concentration, Status, Signal strength, Initiate check cycle Diagnostic data
Current loop (analog) outputs (2): 0, 2, 4, 10 – 20 mA user configurable for track or hold
Operating Temperature: Relay outputs (3):
Options
Air mover assembly for air purge
Air purge blower unit
Transfer / Adapter Flanges
Flue gas thermocouple with current loop transmitter

Resource & Download

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | Land-Carbon Monoxide Monitor ( Model: Series 9000 ).

Comments are closed.