Innovative and Scalable
Magna-Power Electronics MT Series combines the best of DC power processing with microprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. MT Series power supplies arecurrent-fed and are more tolerant to abusive loads than conventional switching power supplies. This technology allows the power supply to operate under short-circuit conditions, open-circuit conditions, and everything in between.
MT Series power supplies offer both master/slave parallel and series operation. This enables two or more power supplies to be placed in parallel for increased output current or in series for increased output voltage. With master/slave operation, power supplies operate at near equal voltage and current. The process of master/slaving power supplies is plug & play with the use of Magna-Power Electronics UID46 option, which can be added at any time.
MT Series power supplies can operate as a voltage source or current source depending on the control settings and load conditions. If the power supply is operating as a voltage source and the load increases to a point beyond the current command setting, the power supply automatically crosses over to current mode control and operates as a current source at that setting.
Designed for Safety
The MT Series power supplies have extensive diagnostic functions — all of which, when activated, take command to shut down the system. Diagnostic functions include phase loss, excessive thermal conditions, over voltage trip, over current trip, fuse clearing, and program line. Program line monitors externally applied analog set point signals to insure they are within the specified range. Upon a diagnostic fault condition, main power is disconnected and the diagnostic condition is latched into memory. Pressing the clear key clears the memory. All diagnostic functions can be monitored through a rear connector. Furthermore, control functions can also be set through the rear connector to allow simultaneous control of one or more MT Series units.
MT Series supplies have three levels of over voltage/current protection: shutdown of controlling insulated gate bipolar transistors (IGBT’s), disconnect of main power, and input fuses. After an over voltage/current trip condition, the supply must be reset.
Load Dependent Air Cooling
The MT Series power supplies are designed to operate at rated load 24 hours per day. Standard air cooled units are equipped with variable speed, load dependent blowers to maintain comfortable margins for removing heat from sensitive power semiconductors. Variable speed operation maximizes fan life and a minimizes external environmental hazards.
Model Ordering Guide
Models Chart
The following chart details the available standard MT Series models. The Current Maximum (Adc) column is separated by the available power levels. To determine the appropriate model, first select your output Voltage Maximum (Vdc) to find appropriate row. Next, select one desired Current Maximum from the row that contains your desired Voltage Maximum. Then, construct your model number according to the model ordering guide, above. Non-standard voltage and current configurations are available. Configurations above 1000 kW are also available. Please contact your local sales partner for more information.
|
100 kW |
150 kW |
250 kW |
500 kW* |
750 kW* |
1000 kW* |
|||
|---|---|---|---|---|---|---|---|---|
|
Voltage Maximum |
Current Maximum |
Ripple (mVrms) |
Eff. (%) |
|||||
|
16 |
6000 |
N/A |
N/A |
N/A |
N/A |
N/A |
35 |
90 |
|
20 |
5000 |
N/A |
N/A |
N/A |
N/A |
N/A |
40 |
90 |
|
25 |
N/A |
6000 |
N/A |
N/A |
N/A |
N/A |
40 |
90 |
|
32 |
3000 |
4500 |
N/A |
N/A |
N/A |
N/A |
40 |
90 |
|
40 |
2500 |
3750 |
6000 |
12000 |
18000 |
24000 |
40 |
91 |
|
50 |
2000 |
3000 |
5000 |
10000 |
15000 |
20000 |
50 |
91 |
|
80 |
1250 |
1850 |
3000 |
6000 |
9000 |
12000 |
60 |
91 |
|
100 |
1000 |
1500 |
2500 |
5000 |
7500 |
10000 |
60 |
91 |
|
125 |
800 |
1200 |
2000 |
4000 |
6000 |
8000 |
100 |
91 |
|
160 |
620 |
900 |
1500 |
3000 |
4500 |
6000 |
120 |
91 |
|
200 |
500 |
750 |
1250 |
2500 |
3750 |
5000 |
125 |
91 |
|
250 |
400 |
600 |
1000 |
2000 |
3000 |
4000 |
130 |
92 |
|
375 |
270 |
400 |
660 |
1320 |
1980 |
2640 |
170 |
92 |
|
400 |
250 |
375 |
625 |
1250 |
1875 |
2500 |
180 |
92 |
|
500 |
200 |
300 |
500 |
1000 |
1500 |
2000 |
220 |
92 |
|
600 |
160 |
240 |
400 |
800 |
1200 |
1600 |
250 |
92 |
|
800 |
120 |
180 |
300 |
600 |
900 |
1200 |
300 |
92 |
|
1000 |
100 |
150 |
250 |
500 |
750 |
1000 |
400 |
92 |
Resource & DownloadLưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | Magna Power Electronics- Programmable DC Power Supplies (Model:MT SERIES VI: 100 KW TO 2000 KW+).
PHỔ BIẾN |
Comments are closed.