Magna Power Electronics- Programmable DC Power Supplies (Model:XR Series IV: 2 kW to 8 kW)

197
1236
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

Innovative and Scalable

Magna-Power Electronics XR Series combines the best of DC power processing with microprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. XR Series power supplies are current-fed and are more tolerant to abusive loads than conventional switching power supplies. This technology allows the power supply to operate under short-circuit conditions, open-circuit conditions, and everything in between.

XR Series power supplies offer both master/slave parallel and series operation. This enables two or more power supplies to be placed in parallel for increased output current or in series for increased output voltage. With master/slave operation, power supplies operate at near equal voltage and current. The process of master/slaving power supplies is plug & play with the use of Magna-Power Electronics UID46 option, which can be added at any time. 

XR Series power supplies can operate as a voltage source or current source depending on the control settings and load conditions. If the power supply is operating as a voltage source and the load increases to a point beyond the current command setting, the power supply automatically crosses over to current mode control and operates as a current source at that setting.

Designed for Safety

The XR Series power supplies have extensive diagnostic functions — all of which, when activated, take command to shut down the system. Diagnostic functions include phase loss, excessive thermal conditions, over voltage trip, over current trip, fuse clearing, and program line. Program line monitors externally applied analog set point signals to insure they are within the specified range. Upon a diagnostic fault condition, main power is disconnected and the diagnostic condition is latched into memory. Pressing the clear key clears the memory. All diagnostic functions can be monitored through a rear connector. Furthermore, control functions can also be set through the rear connector to allow simultaneous control of one or more XR Series units.

XR Series supplies have three levels of over voltage/current protection: shutdown of controlling insulated gate bipolar transistors (IGBT’s), disconnect of main power, and input fuses. After an over voltage/current trip condition, the supply must be reset.

Electronic Output Stage

The new and novel XR Series output stage utilizes constant power loading under all conditions via an electronic bleed resistance. This electronic bleeder means stability under all operating conditions and faster fall times, without affecting the overall system efficiency.

Model Ordering Guide

Models Chart

The following chart details the available standard XR Series models. The Current Maximum (Adc) column is separated by the available power levels. To determine the appropriate model, first select your output Voltage Maximum (Vdc) to find appropriate row. Next, select one desired Current Maximum from the row that contains your desired Voltage Maximum. Then, construct your model number according to the model ordering guide, above. Non-standard voltage and current configurations are available.

2 kW

4 kW

6 kW

8 kW

Voltage Maximum

Current Maximum

Ripple (mVrms)

Efficiency (%)

5

375

N/A

N/A

N/A

50

86

10

200

375

N/A

N/A

40

86

16

125

250

375

N/A

35

86

20

100

200

300

375

40

86

32

62

124

186

250

40

86

40

50

100

150

200

40

87

50

40

80

120

160

50

87

80

25

50

75

100

60

87

100

20

40

60

80

60

87

125

16

32

48

64

100

87

160

12

24

36

50

120

87

200

10

20

30

40

125

87

250

8

16

24

32

130

88

375

5.3

10.6

15.9

21.3

170

88

400

5.0

10.0

15.0

20.0

180

88

500

4.0

8.0

12.0

16.0

220

88

600

3.3

6.6

9.9

13.3

250

88

800

2.5

5.0

7.5

10.0

300

88

1000

2.0

4.0

6.0

8.0

350

88

2000

1.00

2.00

3.00

4.00

5500

88

4000

0.50

1.00

1.50

2.00

6500

88

6000

0.30

0.66

1.00

1.33

7500

88

8000

0.25

0.50

0.75

1.00

8500

88

Resource & Download

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | Magna Power Electronics- Programmable DC Power Supplies (Model:XR Series IV: 2 kW to 8 kW).

Comments are closed.

02873000184