Overview
The VersaSTAT LC Low Current Interface is a plug-in, research grade option for the VersaSTAT Series of potentiostats/galvanostats, designed for the measurement of ultra-low currents with greater accuracy and resolution than the base system. With the addition of a VersaSTAT LC option, any VersaSTAT Series system will acquire a lowest current range of 4pA and current resolution as small as 122aA.
The VersaSTAT LC is ideal for applications requiring low current accuracy and resolution. Applications such as ultra micro electrodes, coatings research, corrosion testing of bio-implants, and sensor research are all areas where greater current sensitivity may be needed.
The VersaSTAT LC option can be purchased at any time as a plug-in option. It consists of an interface cable to connect to the VersaSTAT, a main body containing the high input impedance electrometer and additional current ranges, and the cell leads. Once attached to the VersaSTAT system and calibrated with the built-in DC Calibration routine, additional bandwidth stabilization filters are provided with the VersaSTAT LC option to provide maximum stability over a wide range of experimental conditions and applications.
- Femtoampere accuracy and attoampere resolution for both DC and AC (EIS) measurements
- Plug-in add-on for VersaSTAT Series potentiostats/galvanostats
- Expands E and I filter selection for VersaSTAT 3 and VMC systems
- Auto-current ranging capability from 200mA-4pA
VersaSTAT 3F
potentiostat/galvanostat
- 650mA current maximum
- Capable of "floating" operation
- Specialized float mode filters for enhanced signal to noise ratio
- FRA option for EIS measurements
- Multiple bandwidth filtering options
- Easy to use VersaStudio Software included
Sharing similar specifications to the VersaSTAT 3 and VersaSTAT 4, the
VersaSTAT 3F was designed specifically to operate with earth grounded cells.
| VersaSTAT 3 potentiostat/galvanostat
Versatile performance at an affordable price – the ide |
Comments are closed.