SEW EURODRIVE – Inverters MB07B series

FBG11B

Easy-to-use plug-in keypad

UBP11A

Parameter module

DBG60B

Plain text keypad

FSC11B / FSC12B / FSE24B

Communication module for networking MOVITRAC^® MC07B via an SBus / RS-485 / EtherCAT^® for diagnostics and configuration using a PC.

FIO11B

Analog module with setpoint input, analog output and RS-485 interface

FIO21B

Digital module with 7 binary inputs and SBus connection

MBG11A

Speed control module

DFP21B / DFE24B / DFE32B / DFE33B / DFD11B

Fieldbus gateways PROFIBUS DP-V1 / EtherCAT^® / PROFINET IO / EtherNet/IP and Modbus TCP / DeviceNet (CANopen integrated in basic unit)

UWS11A / UWS21B / USB11A

Interface adapter

MOVI-PLC^®

Motion control programmable in IEC 61331 with powerful libraries

Application version with IPOS^plus® programming and simple positioning application module

SafetyDRIVE: Integrated functional safetyStandard version Safe Torque Off (STO) up to PL d accoridng to EN ISO 13849-1 for 3 x AC 230 V / 400 V units from 0.55 kW to 75 kW (optional 230 V up to 2.2 kW and 400 V up to 4 kW)

MOVITOOLS^® operating software MotionStudio

The MOVITOOLS^® MotionStudio program package allows you to conveniently start up, set parameters and run diagnostics for MOVITRAC^® MC07B frequency inverters and MOVIDRIVE^® MDX60/61B drive inverters.

MDR60A regenerative power supply unit

The MDR60A regenerative power supply unit can be used to supply multiple units with power using a central power supply connection. In regenerative mode, the power is fed back into the supply system. By using MDR60A, you can save power and installation costs.

Braking resistor type BW

BW series braking resistors are available for operating MOVITRAC^® MC07B frequency inverters and MOVIDRIVE^® MDX60/61B drive inverters as generators. Using an integrated temperature sensor, the resistor can be protected without external monitoring.

Line choke type ND

ND series line chokes increase inverter overvoltage protection. This is an important characteristic in rough industrial power supply systems, especially if the inverter is installed near a supply transformer.

Line filter type NF

NF type line filters are available for EMC compliant installation as specified by EN 55011. They suppress interference emissions on the line side of inverters. These line filters ensure that limit value class B is maintained on the supply end.

Output choke type HD

HD series output chokes suppress interference emitted from unshielded motor cables. They enable the motor to meet limit value class B requirements in accordance with EN 55011 in EMC-compliant installations. Output chokes provide an alternative to shielded motor cables in EMC-compliant installations.

Output filter type HF

HF series output filters are sine filters that smooth out inverter output voltage. Output filters are used for group drives to suppress discharge currents in motor cables and for long motor cables to prevent voltage peaks.