OIL & GAS: 3LPE or 3LPP Thick polyethylene (PE) or polypropylene (PP) coatings for Pipes, Bends, Buckle Arrestors, Field Joints
Gladiator Spartacus, in the new version for the oil & gas industry, has been spacifically designed to offer a very high flow rate of powder delivered so as to satisfy the need of quickly applying large quantities of PE or PP (3 to 5 mm-thick layers or more) on gas pipes, bends, joints, to make up the tie-layer and or top layer in the 3-layer coating system.
New Spartacus for the "Oil & Gas" industry
Portable and easy to use
Very High Powder Flow Feeding System
Large wheels for easier transport on rough terrain
Quick connect, colour coded, hoses to machine
Ergonomic High Flow Gun and Medium Size Guns with Handles and Powder On-Off Trigger
Repair Gun as an option
1 m. longer gun hoses to the control plate or – upon request – controls fixed on the machine casing
Only requires dry compressed air & LPG
Heating capacity suitable to apply a fully melted PP10 coating layer to 5 mm and more in one operation
 |
 |
 |
Spartacus with IBIX extruded aluminium tank
Spartacus with Stainless Steel Tank (high powder vibration)
Spartacus with Fluid Bed Tank (for FBE)
Multifuncion thanks to 3 different coating powder supplies
Supply by means of a Venturi System connected to the special IBIX extruded aluminium tank (non-pressurized mode) or the IBIX Stainless Steel Tank
Supply under pressure via the special IBIX extruded aluminium tank (pressurized mode)
Supply by means of a Venturi pump with the special IBIX-FluidBed tank (optional)
Comments are closed.